2.10 Guidance of Disassemble the side board controller PCB
A:
Take off the right side board outer cover and decorative parts(Refer to Guidance of Disassemble the Rear
cover of Headrest
)
B:
Locate the screws that fixing the right armrest and remove it.Then take off the right armrest and
disconnect the connector on the side controller PCB.(Refer to Guidance of Disassemble the
R
emote control
bracket
/
Wireless charge
)
( As pictures below show)
C:
Locate the five screws and remove them,we can take off the side controller PCB.
Locate the 9 screws
Disconnect the connector
Locate the 5 screws
