2.8 Guidance of Disassemble the Remote control
A:
Take off the left side board.(Refer to Guidance of Disassemble the Side board
)
B:
Track the remote control wire find the wire clip on the frame.Use screw driver remove the screw which
secure the wire clip.Slacken and remove the wire connector cap and take off the remote control.
2.9 Guidance of Disassemble the
R
emote control bracket
/
Wireless charge
A:
Take off the left side board outer cover and decorative parts(Refer to Guidance of Disassemble the Rear
cover of Headrest
)
B:
Locate the screws that fixing the armrest and the connector that connect the Wireless charge.Then use
screwdriver slacken and remove these screws and disconnect the Wireless charge connector.
Attention:
there are 11 screws and 1
connector
