14.
Therapy
– Press once to start. Press again to stop.
15.
Smart
– Press once to start. Press again to stop.
16.
Circulation
– Press once to start. Press again to stop.
NOTE
: If an Auto Program is selected before the chair has run an Auto Scan
of the entire body, the chair will run an Auto Scan before running the Auto
Program. This takes approximately 15 seconds.
NOTE
: While running an Auto Program the strength, speed, and intensity can
be adjusted. The adjustment can be done only while the massage functions
that use those settings are running. Once an adjustment is made the
adjustment will be used by all other functions that utilize the same setting.
Width settings cannot be adjusted, however.
LOCALIZED AUTO PROGRAMS
17.
Neck/Shoulder
– Press once to start. Press again to stop.
18.
Back/Lumbar
– Press once to start. Press again to stop.
19.
Lower Body
– Press once to start. Press again to stop.
NOTE
: The Lower Body program can be combined with either the
Neck/Shoulder program or the Back/Lumbar program.
20.
Demo
– Press this button to run a brief demonstration of the chair’s features.
Press this button again to stop the demonstration.
MANUAL BACK MASSAGE PROGRAMMING
21.
Tapping
– Press this button once to start the Tapping function in Mode 1 for
a full back massage. Press again to start the Tapping function in Mode 2.
Press the button a 3
rd
time to stop the Tapping function. Use Button 26 to
control the speed of the Tapping function. Use Button 27 to control the width
of the Tapping function.
22.
Clapping
– Press this button once to start the Clapping function in Mode 1
for a full back massage. Press again to start the Clapping function in Mode 2.
Press the button a 3
rd
time to stop the Clapping function. Use Button 26 to
control the speed of the Clapping function. Use Button 27 to control the
width of the Clapping function.
23.
Shiatsu
– Press this button once to start the Shiatsu function in Mode 1 for a
full back massage. Press again to start the Shiatsu function in Mode 2. Press
the button a 3
rd
time to stop the Shiatsu function. Use Button 26 to control
the speed of the Shiatsu function. Use Button 27 to control the width of the
Shiatsu function.
24.
Rolling
-‐ Press this button once to start the Rolling function, which offers
vigorous rolling action on the body’s reflex points. Press the button again to
