7.2.2 Seat installation
The seat can be used in only a forward facing position at Group 2+3.
The ISOFIX connector is optional for Group 2+3,
7.2.2.1
First refer to
chapter 4.2
to adjust the seat angle to the right position.
7.2.2.2
Then refer to
chapter 5.1
to
put the child seat onto the vehicle seat, make
sure the backrest is flush against the vehicle seat backrest.
7.2.3 Fit your child
7.2.3.1.
Fit your child seat in the vehicle seat.
Make sure your child's back is against the
backrest
(fig.26)
.
7.2.3.2.
Adjust the height of the headrest, the
space between the top of child's shoulder and the
bottom of the headrest should be two finger space
apart.
7.2.3.3.
E
xtend the vehicle belt to the maximum
length and move the belt around in front of your child.
Insert the buckle tongue into the vehicle buckle until
you hear an audible "click".
(fig.56, 57)
7.2.3.4.
Insert the diagonal belt into the diagonal belt
guide on the bottom of the headrest
(part.02)
.
7.2.3.5.
Adjust the vehicle belt`s lap section. It is
important to ensure that any lap strap is worn low down,
so that the pelvis is firmly engaged.
7.2.3.6.
Pull the diagonal belt at the top of the
vehicle buckle to make the belt tight
(fig.58)
.
7.2.3.7.
Then pull the diagonal belt at the top of
the seat as indicated as tight as you can
(fig.59)
.
7.2.3.8.
Finally check the child seat is fixed stable on
the vehicle seat.
If you find any shaking movement you must tighten
the belt again.
56
57
58
59
22
Содержание Arthur EST-528
Страница 1: ......