Cozy N Safe Arthur EST-528, Инструкция по эксплуатации

Страница: 19 / 28

Test whether the connector hooks are opened
by pushing the ISOFIX unlock button (part no.07)
forward (Fig. 38) .
When the ISOFIX unlock button indicates "RED", the
connector hooks are open.
6.4.1.3 . Push down the instruction
box button (part no.18) , pick the top
tether (part no.21) and put it to the front of
the child seat
(fig.41)
.
.
6.4.1.2 Using one hand grab the ISOFIX control
handle (part no.16) at the lower part of
the base, and pull outward (Fig.37) .
The ISOFIX connectors (part no.23) will
now automatically extend from the back of the seat
base (part no.24) .
PULL
POP OUT AUTOMATIC
ISOFIX
37
38
6.4.1.4 Then place the seat on the vehicle seat and push
both ISOFIX connectors
(part no.23)
onto
the metal brackets (ISOFIX anchor points) and press
firmly against it so that the connectors (part no.23)
lock in place (Fig. 39) .
The correct locking will be confirmed when the indicator
changes to "GREEN" this shows on the ISOFIX unlock
button (part no.07) on both sides (Fig 40) .
Test whether the ISOFIX connectors (part no.25) are
closed by moving the seat shell (part no.31) and
checking if the are locked well in place.
6.4.2 Top tether installation
.
6.4.2.1. Push down the button on the top
tether adjuster (part no.20) and at the
same time pull the belt at anchor point side
near the child seat to length the top tether
strap (fig.42) .
press
41
42
CLICK
39
40
18