9
How to use your Heated Throw
To begin using your
Heated Throw
, first, carefully unpack it and check that it
has not sustained any damage during transportation. Also, check that all the
items shown in the
PRODUCT OVERVIEW
are present. We recommend that
you retain your packaging so that, in the unlikely event of a fault developing,
you are able to return the product in the correct packaging to ensure best
protection.
Before first use
1. Remove all packaging material.
2. Remove any stickers or labels from the appliance.
DO NOT
remove the
Product Rating Plate.
Preparing for use
1. This appliance is intended to be used a
THROW
or
OVER BLANKET
and therefore should always be placed on top of an individual,
NOT
under them or on the top of a bed sheet. It is
NOT
to be used as an
UNDER BLANKET.
2. Connect the
Controller Socket Connector
(5) on the end on
the
Controller Cord
(2) to the
Heated Throw
(1),
Blanket Plug
Connector
(4), see the diagram below:
3. When connecting the
Controller Cable
to the
Heated Throw
the
locking tab on the
Connectors
will engage automatically. When you
wish to disconnect the
Controller Cord
from the blanket the locking tab
on the
Blanket Plug Connector
must be lifted so that they can be
separated.
IMPORTANT. DO NOT
attempt to disconnect the cord without lifting the
locking tab.
