11
Using the Appliance
1. Connect the mains plug of the
Mains Supply Cord
(3) to a convenient
wall socket.
WARNING.
Take care to avoid any trip hazards when routing the cable.
2. Press and hold the
ON/OFF, Temp. Switch
(4) on the
Controller
(6)
until the Display comes on (about 2-3 seconds).
3. The
Heated Throw
will turn on to the default settings as shown in Fig 1.
4. If you wish you can warm up the blanket rapidly by pressing the
ON/OFF, Temp Switch
once to change the
Heat Setting
to
H (HIGH)
.
This will provide 1 hour at the highest heat level before automatically
reducing down to level
1
.
5. Alternatively, you can select any of the intermediate
Heat Settings
by
sequentially pressing the
ON/OFF, Temp Switch
until you reach your
desired
Heat Setting
.
6. The Timer Switch can be pressed at any point to adjust between 90 min
and 12 hours depending on your preference.
WARNING: DO NOT
fall asleep with the
Heated Throw
on a
High
Setting
as you may become too warm.
7. When you have finished using the
Heated Throw
press and hold the
ON/OFF, Temp Switch
for around 2 seconds to turn off the blanket.
Then switch off at the wall socket and unplug the Heated Throw by
grasping and pulling the plug. Do not pull on the cord.
8. Loosely fold your Heated throw and store in a dry location out of the
reach of children.
