background image

Scope of This Manual

 Page 3 

TRB-UM-00478-EN-01

September 2018

SCOPE OF THIS MANUAL

This manual is intended as an installation and operation guide for the Cox Exact Dual Rotor 
turbine flow meter  Please consult the factory or our website for any questions or concerns 
regarding any of the equipment or installation  The electronic version of this manual is 
available on our website at 

www.badgermeter.com

 

IMPORTANT

Read this manual carefully before attempting operation. Keep the manual in an 

accessible location for future reference.

Unpacking and Inspection

Upon opening the shipping container, visually inspect the product and applicable 
accessories for any physical damage such as scratches, loose or broken parts, or any other 
sign of damage that might have occurred during shipment 

OTEE:

N

If damage is found, request an inspection by the carrier’s agent within 48 hours of 
delivery and file a claim with the carrier  A claim for equipment damage in transit 
is the sole responsibility of the purchaser 

Inspect all packing material carefully to prevent the loss of meter parts or auxiliary 
components, which may have been packed with the shipment  Refer to the packing list/
invoice for a detailed list of items included in the shipment 

SAFETY CONSIDERATIONS

Terminology and Symbols

 

Indicates a hazardous situation, which, if not avoided, is estimated to be 
capable of causing death or serious personal injury 

WARNING

 

Indicates a hazardous situation, which, if not avoided, could result in 
severe personal injury or death 

 

Indicates a hazardous situation, which, if not avoided, is estimated to be 
capable of causing minor or moderate personal injury or damage  
to property  

Содержание Exact Dual Rotor

















Отзывы: