3
To send a notifications packet from the WorkPoint, press the button using a pinhole
press tool. This will illuminate the LED and force the device to advertise a packet.
FIRMWARE AND FLASHING //
CoWorkr WorkPoints ship pre-flashed with the latest firmware. For updates to the
firmware, the device must be attached to an installer’s computer using a JTAG
connector, wherein the firmware revision can be flashed onto the device. Firmware
updates are not commonly done on production devices.
INSTALLATION //
Install Overview
Sensors are installed in locations specified by CoWorkr. Sensors have an ID that is
used to find where each device should be installed on a provided, pre-designed floor
plan that is issued by CoWorkr.
Use the (included) floor plans to locate each sensor. Sensors are typically ordered
numerically so the installer should be able to make a continuous path through the
floor plan while installing sensors in the order of the devices in the box.
Use the floor plans to plan how you will deploy yourself or your team to make the
best use of your time.
Desk and Room WorkPoint Sensors are installed based on the installation type (on
furniture or ceiling) that is shown on the floor plan. Desk WorkPoints are black and
have a smaller opening that helps narrow the field of view of the space. Room
WorkPoints (white) have a spherical field of view that maximizes the sensing area.
