2
PURPOSE //
Information on how to use CoWorkr’s WorkPoint Sensor
DEFINITIONS //
WorkPoint Sensor
CoWorkr “Workpoints” are battery
-powered occupancy sensors that use passive
infrared sensors for detecting human activity. While WorkPoints are traditionally used
to provide high-res occupancy data on workstations, these devices may also be
used to monitor small meeting spaces where the number of occupants is not
needed.
•
WorkPoints are always “on” meaning, if there’s a battery in the device, they’re
sending out data. All sensors will ship to installers with batteries installed.
•
WorkPoints include a double-stick backing that allows for a simple installation.
•
WorkPoints have a Label with an ID and barcode
WorkPoint Versions:
V4 - Version 4 (2019+) "Motion" WorkPoint Sensor that uses a digital passive
infrared sensing
DEVICE SETTINGS & CONFIGURATION //
CoWorkr WorkPoints do not have any configurable elements to the physical devices.
They simply carry out the instructions provided by the firmware. Otherwise, the
devices are able to turn on and off as well as send a notification.
Powering On/Off:
WorkPoints do not have an on/off switch. To power on a WorkPoint, simply insert the
battery. To power off, remove the battery.
Notifications:
