cowfish VanTenna, Руководство пользователя и инструкция по установке, Страница: 13 / 19

Page 12
USING THE VANTENNA
Once you have securely installed your VanTenna, you don’t have to worry
about it anymore. You don’t need to figure out where to point the antenna or
re-adjust it if the wind blew too hard. Just install it once and forget it.
The next step is to scan for channels on your TV. You will need to scan for
channels every time there’s a change in your location. That means you have
to rescan every time you move your caravan, RV, motorhome or camper.
Scanning (or rescanning) for channels is mostly an automated process. All you
have to do is the following simple steps.
1. Ensure your TV is connected to the VanTenna.
2. Ensure that the VanTenna is powered on.
3. Press the “Menu” button on your remote control. If you don’t have a
remote, your TV should have a built-in “Menu” button.
4. Find and select the “Channel Scan” option in your TV’s menu. This option is
sometimes labeled “Rescan,” “Tune,” or “Auto-tune.”
5. If you can’t find the “Channel Scan” option, dig through the TV’s “Settings,”
“Tools,” “Channels,” or “Options” menu. On some TVs, you have to press
the “Input” button and go to “Antenna.”
When scanning is complete, your TV will either display how many channels
are available or drop you back into a broadcast.
If you’re having trouble finding the “Channel Scan” option on your TV, then
it’s time to consult the TV manufacturers manual. You can usually find a
manual by searching the web for the TV’s make and model along with the
word “manual.”
Page 13