EN-22
Kendall SCD 700 Series
Section VIII - Specifications
Kendall SCD 700 Series Compression System
Safety Standards
Built to UL60601-1, CSA-C22.2 No. 601.1-M90, JIS T 0601-2-204, EN60601-1,
and IEC 60601-1-2 Standards UL Classified File # E189131
Device Classification
Class I Equipment Internally Powered, Portable Type BF Applied Parts Not AP or
APG Equipments
Mode of Operation
Continuous
Ingress of Water
Protection
IPX3 (IEC 529)
Compression Type
Leg Sleeves: Sequential, Gradient, Circumferential; Foot Cuffs: Uniform
Compression Cycle
Leg Sleeves: 11 Seconds Compression; Foot Cuffs: 5 Seconds Compression
Decompression time based upon Vascular Refill Detection measurement
Set Pressure
Leg Sleeves: 45 mmHg
Foot Cuffs: 130 mmHg
Adjustable Bed Hook
Yes
Power Cord Storage
Yes
Audible/Visual Alarms
Low Pressure, High Pressure, Internal Electronics Malfunction
Power Cord
13 feet long with region specific appropriate cordage and plug
Controller Dimensions:
Height: 6.8 inches (17.3 cm)
Width: 7.7 inches (19.6 cm)
Depth: 4.5 inches (11.4 cm) (when placed on a foot board)
Depth: 7.3 inches (18.5 cm) (free standing)
Controller Weight
5.0 lbs. (2.3 kg)
Power Requirements
100-240 VAC, 50VA, 50/60 Hz
Battery
10.8 V, 2200mAh, Lithium Ion pack
Run Time: 6-8 hours
Charge Time: 4 hours (charging only)
Shipping Unit
Each
Shipping Case Dimensions
11.6 inches (29.4 cm) X 9.25 inches (23.5 cm) X 13.25 inches (33.7cm)
Shipping Weight
7 lbs. 4 oz. (3.3 kg)
Tubing Set
Included, set of two individual assemblies
Operation & Service
Manual
Included as either CD or Paper Manual
Transport & Storage
-20°C (-4°F) to 55°C (131°F) If the user suspects that the environment conditions
for transport and storage have been exceeded, return the unit for service.
