background image

  Any Cover Valet shown to be unserviceable due to defects in materials or workmanship within 5 

years from the date of purchase will be repaired or replaced at the option of California Home Spas, 

INC, without charge for labor or materials. (This

excludes the cost of freight to and from the manufacturer).

EXCLUSIONS:

A. This warranty does not cover damage incurred by the use of the Cover Valet and/or the spa cover, other

than in accordance with the printed literature provided by California Home Spas, INC.

B. Defects in components of any part, which are not part of the Cover Valet.

C. Misuse, abuse, negligence, accident, or alterations other than authorized by California Home Spas, INC.

D. Improper installation, normal fading and minor deterioration caused by exposure to the sun, rain, chemicals

or environmental factors.

E. Use of solvents, abrasive cleaners or brushes, and strong detergents.

F. Gas shock: 1 year.

Except as expressly provided, there shall be no additional Warranty obligation expressed or implied oral

or statutory

ADDITIONS:

A. California Home Spas, INC. shall not be liable for consequential damages or incidental expenses resulting from any

breach of the before mentioned warranties.

B. This warranty gives you specific legal rights and you may have other rights which can vary in different states and

countries.

C. Any dispute between the Buyer and California Home Spas, INC. pertaining to this warranty may, at the option of the

Buyer, be resolved in the State of California, USA, in according to the rules of the American Arbitration Association.

D. Should any one or more of the terms, provisions, covenants, or conditions of this warranty be determined void, invalid,

illegal, or unlawful in any respect, then it shall be so, however it will not affect any of the other terms or provisions of this

warranty and the remainder hereof shall still be in effect.

California Home Spas, Inc.

Cover Valet 5-Year Limited Warranty

COVER VALET WARRANTY REGISTRATION FORM

Complete and return within (10) days. Please type or print clearly. Incomplete and/or unreadable forms may 

not be registered.

You can also register your warranty online at www.covervalet.com

Owners Name:.

Address: 

Phone Number: (           ) 

E-Mail Address:

Date of Purchase:

. Dealer’s Name:

How did you hear about us?

1. Dealer             . 4. Home Show             . 7. Other

.

2. Showroom Display             . 5. Magazine             . 8. Internet (website) 

3. Friend             . 6. T.V.             .                                                                     .

For more information, Please contact us at: Cover Valet Toll free: 1-800-730-7727

 1621 East Spring Street. International: (001) (562) 283-0595

Visit us at: www.CoverValet.com Long Beach, CA. 90806 USA E-mail: [email protected]

C

alifornia

 H

ome

 s

Pas

, i

nC

.

C

over

 v

alet

 5-Y

ear

 l

imited

 W

arrantY

Содержание PRO













Отзывы: