PAGE 6 OF 6
Operating your outdoor fireplace
Before lighting:
Always use in accordance with all applicable local and national fire codes. Use on noncombustible
surfaces such as concrete, brick, or rock. Use extreme caution when using on a wooden deck. Do
not leave unit unattended at any time. Keep all screws and nuts tight, and inspect on a regular basis
to be sure fireplace is in safe working condition.
Keep away from flammable material and fluids such as gasoilne, alcohol, diesel fuels, kerosene,
charcoal lighter fluid, and/or automobiles.
Do not burn trash, leaves, paper, cardboard, or plywood in the fireplace. Avoid using softwood
such as pine or cedar, because they are likely to throw sparks. The use of seasoned hardwood is
recommended.
Lighting Your Fireplace:
While in Use
Exercise the same precautions you would with any open fire.
Do not allow children to use the fireplace. Keep children and pets away from the fireplace while
it is in use.
Do not wear flammable or loose clothing when using the fireplace.
Do not move the fireplace while in use.
Use heat-resistant gloves or hotpads when handling parts of the fireplace. Use long, sturdy fireplace
tools when adding or moving logs.
To extinguish a fire in your fireplace:
Allow fire to burn itself out. The fireplace and ashes inside will remain hot for some time.
Do not store the fireplace until the fire is completely out, and all surfaces are cold. Do not store the
fireplace with the ashes or combustible materials inside.
Arrange firewood in center of grate.
Do not overload the fireplace to the point that the spark guard will not cover properly.
Do not use flammable fluids such as gasoline, alcohol, diesel fuel, kerosene, or charcoal lighter
fluid to light or relight fires.
Care Instructions
To clean wipe with a sponge and warm soapy water then wipe with a dry, clean cloth. Do not
use solvent based cleaners or detergents as they can bleach or damage the product.
Never use a pressure hose or washer to clean the product.
Never use scourers, abrasives or chemical cleaners.
Wipe clean with a soft dry cloth.
Store the product in a cool dry place. Before storage ensure that it is clean and dry.
We recommend the use of furniture covers to protect your product when not in use.
During bad weather and winter months the product should be stored in a cool dry place.
To clean metal frame, use a soft cloth moistened in lukewarm soap and water. Then buff
with a dry clean cloth.
The frames are manufactured using the powder coated steel tubing. When steel is exposed to
air and moisture it will rust. Any scratches on the paintwork should be touched up immediately
with metal paint, otherwise corrosion may occur.
STOP
DON’T RETURN TO STORE!
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free:
TEL: 1-877-539-7436
FAX: 1-877-539-7439
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
