Step 6:
When the fire is not in use, cover the fire bowl with
the cover (#6), position the spark guard (#8) to the
center connector. Keep the grate in the fire bowl.
See Figure 6.
NOTE:
Press the button in the middle of the cover, the
handle automaticly comes up. Remove the cover
by lifting the handle.
FIGURE 6
Press
8
6
Step 5:
See the state of fire igniting. See Figure 5.
FIGURE 5
NOTE:
The position of the plastic cooler (#9) in the
Illustration B is not allowed.
B
9
WARNING :
The edges of tiles may be sharp, please wear
protective gloves before open the cartons.
Step 4:
Fasten the handle (#18) to the spark guard (#8) by
using washers (#13 and #14) and nut (#16). Put the
fire bowl (#7) into the table top, cover the fire bowl
with a spark guard (#8). Position the cover (#6) and
the plastic cooler (#9) to the center connector (#3).
See Figure 4.
FIGURE 4
18
13
13
14
16
8
8
7
3
6
9
PAGE 4 OF 6
STOP
DON’T RETURN TO STORE!
