STOP
DON’T RETURN TO STORE!
PAGE 3 OF 3
Cleaning and Maintenance
•
Wash frame and fabric parts with mild soap and water, rinse
thoroughly, and dry completely. Do not use bleach, acid, or
other solvents on the frame or fabric parts.
•
We recommend the use of furniture covers when not in use.
•
Inspect and tighten all bolts and fasteners on a regular
basis to ensure the proper performance and safety of your
lounge chair.
•
In order to prolong the life and beauty of your lounge chair,
we recommend that it be stored in a dry and protected area
during off season periods.
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free:
TEL: 1-877-539-7436
FAX: 1-877-539-7439
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
FIGURE 6
FIGURE 8
FIGURE 7
5
4
12
13 10
9
16
39
#9 BOLT M6*39
Step 6:
Flip the chair upside down. Fasten the ottoman (#5) to the
tracks on the seat assembly (#4). Put the washer (#10) and
pulley B (#13) onto bolt (#9). Insert this through the track
and into pulley A (#12). Then, secure to the ottoman (#5).
Repeat the same procedure for both sides. Make sure that all
of the bolts have been tightened completely and cover them
with bolt caps (#14, #15, and #16). See Figure 6.
Step 7:
Adjust the back assembly (#3) to your desired position.
See Figure 7.
Step 8:
Pull out the ottoman (#5) as needed.
See Figure 8.
5
3
