Country Clipper Zeton Скачать руководство пользователя страница 6

25. 

MOW ONLY DURING DAYLIGHT.

 

 

26.  

THIS MACHINE IS NOT MEANT FOR 
HIGHWAY OR STREET USE.

  It is not 

a recreational vehicle and it should not 
be operated as such. 

 

27.   

ALWAYS DISENGAGE THE MOWER  

       BLADE CLUTCH

 when transporting.

 

 

 
 

SAFETY INTERLOCK SYSTEM 

 

Your 

Country Clipper

 Zero Turning Radius 

Mower is equipped with switches interlocked for 
your safety. 
 

ON JOYSTICK MODELS 

NEUTRAL IS WHEN THE 

JOYSTICK IS IN THE 

“DOWN” 

POSITION. 

 

ON TWIN STICK MODELS 

NEUTRAL IS WHEN 

 BOTH HANDLES ARE IN THE 

“OUT” 

POSITION.

 

 
 
 
 
 

1.

 

The mower blades must be disengaged 
before engine will start. 

 

2.

 

The Control Lever(s) must be in the 
neutral position before the engine will 
start. 

 

3.

 

The engine will stop if the mower blade 
clutch is engaged when the operator 
leaves the driver’s seat. 

 

4.

 

The engine will stop if the Control 
Lever(s) are not in the neutral position 
when the operator leaves the driver’s 
seat. 

 

5.

 

The engine will stop if the brake is 

“SET”

 and the Control Lever(s) are  not 

in the neutral position. 

 

6.

 

The engine will stop if the brake is 

“SET”

 and the mower blade clutch is 

engaged. 

 
 

DO NOT OPERATE MOWER IF SAFETY 

SWITCHES ARE NOT OPERATING 

PROPERLY 

 
 

START UP AND OPERATION 

 

CHECKLIST BEFORE OPERATION 

 

1.

 

Make sure fuel tank is full.  Use regular 
unleaded gasoline (see engine owner’s 
manual for more details). 

 

      

 

WARNING

       

 

 

HANDLE GASOLINE WITH CARE -- IT IS 

HIGHLY FLAMMABLE.   DO NOT SMOKE.  

ENGINE SHOULD BE OFF AND COOL.  USE 

APPROVED GAS CONTAINER.  NEVER FILL 

TANK INDOORS.  WIPE UP ANY SPILLS.  

REPLACE CAP TIGHTLY. 

 

2.

 

Make sure dirt and foreign matter is kept 
out of gas tank.  Use a clean funnel and 
gas can. 

 

3.

 

Do not mix oil with gasoline. 

 

4.

 

Do not use white, high test or premium 
gasoline.  Do not use de-icers, 
carburetor cleaners, or other such 
additives. 

 

5.

 

Check the crankcase oil level.  Make 
sure the engine is off.  The mower 
should be parked on a level area.  Do 
not overfill. (See your engine manual for 
more detailed instruction.) 

 

6.

 

Check the hydrostatic transmission oil 
level. (See “Maintenance” section of this 
manual.) 

 

7.

 

Check battery fluid level. 

 

8.

 Inspect 

V-belts. 

 

9.

 

Check tire pressure:  

 

Model 

Front tires 

Rear tires 

All 
Models 

12 psi 

12 psi 

 

10.

 

Make sure underside of mower deck is 
free of grass. 

 

11.

 

Make sure mower blades are sharp and 
secured tightly. 

 

6                                                                P-11527 

Содержание Zeton


























Отзывы: