Country Clipper Zeton Скачать руководство пользователя страница 4

 

 

 

 

 

 

 

    

SAFETY 

 

 

ACCIDENT PATTERNS TO AVOID 

 

I. 

CONTACT WITH THE ROTATING 
BLADE --

 This accident usually 

happens when the operator is clearing 
the discharge chute of grass, (especially 
when the grass is wet), or when the 
operator adjusts the machine without 
turning it off and waiting for the blades 
to completely stop. 

 

II. 

PROPELLED OBJECTS -- 

Sticks, 

rocks, wires, and other objects can be 
propelled out through the discharge 
chute or from under the mower housing.  
Bystanders are particularly vulnerable. 

 

III. 

GRASS CATCHER OR GUARD --

 The 

mower shall not be operated without 
either the entire grass catcher or guard 
in place. 

 

IV. OVERTURNING 

-- 

This happens when 

riding mowers are used on steep 
slopes, embankments or hills.  The 
operator in these cases can come in 
contact with the blades or sustain 
injuries during a fall. 

 

V. 

MOWER RUNNING OVER THE VICTIM 
--

 This usually happens when a riding 

mower is driven in reverse.  The 
accident victims are most often young 
children whom, unseen by the operator 
of the mower, were in the area being 
mowed. 

 
 

 

 

SAFETY INSTRUCTIONS AND 

RECOMMENDATIONS 

 

1. 

PEOPLE WHO OPERATE, SERVICE, 
OR ARE OTHERWISE ASSOCIATED 

with the 

Country Clipper

 Zero Turning 

Radius Mower should be trained in its 
proper use and warned of its dangers.  
Before operating, adjusting, or servicing 
the 

Country Clipper

 Zero Turning 

Radius Mower they should read and 
understand this entire manual and the 
engine owner’s manual. 

 

2. 

AVOID CONTACT WITH MOVING 
PARTS.  

Keep hands and feet from 

under mowing deck and away from 
blades at all times.  Turn engine (motor) 
off if you must unclog the chute. 

 

3. 

AVOID HILLS AND SLOPES.

  Use 

extreme caution when mowing up or 
down slopes.  NEVER mow across the 
face of a slope.  If a slope must be 
ascended, back up the slope; drive 
forward when descending.  Reduce 
speed and use caution to start, stop and 
maneuver.  To prevent loss of control on 
a slope avoid sharp turns, sudden 
changes in direction, and sudden stops 
and starts. 

4. 

DISENGAGE POWER TO MOWER 
BEFORE BACKING UP.

  Do not mow 

in reverse unless ABSOLUTELY 
necessary and then only after turning 
around and observing the entire area 
behind the mower.  Go slowly.  Most 
“running over victim” accidents occur in 
reverse. 

 

AT 

COUNTRY CLIPPER

, WE SHARE YOUR 

DESIRE TO PROTECT YOURSELF, YOUR 

FAMILY, YOUR FRIENDS AND YOUR 

NEIGHBORS FROM ACCIDENTAL INJURY.  

OBSERVING AND ENFORCING THE 

FOLLOWING GUIDELINES WILL HELP TO 

INSURE THE SAFETY OF EVERYONE. 

 

5. 

BEGINNING OPERATORS SHOULD 
LEARN HOW TO STEER

 the 

Country 

Clipper

 Zero Turning Radius Mower 

before attempting to mow.  Start with 
slow engine speed and drive without the 
blades engaged in an open area until 
comfortable with the machine. 

 

 

6. 

KNOW HOW TO STOP QUICKLY. 

KNOW THE LOCATION AND OPERATION OF 
EVERY CONTROL,ESPECIALLY HOW TO BRAKE 
AND HOW TO DISENGAGE THE MOWER BLADES.  

        PLEASE BE CAREFUL!

 

4                                                                P-11527 

Содержание Zeton


























Отзывы: