MOWING RECOMMENDATIONS
1.
Keep mower blades sharp.
2.
Make sure deck and discharge are
clean.
CAUTION
POWER MUST BE OFF TO CLEAN
DISCHARGE CHUTE. TURN ENGINE OFF
AND WAIT FOR ALL MOVING PARTS TO
STOP.
3.
When mowing tall grass, make two
passes, mowing off 1/2 of the desired
cut on the first pass, and then the
desired height the second pass. Check
for hidden dangers first.
4.
Go slowly for trimming.
5.
Always cut grass with the engine at full
throttle speed. This “ENGINE” speed
allows the cutting blades to operate at
optimum cutting speed. Control
“GROUND” speed with the Control
Lever(s).
6.
Vary ground speed to suit conditions
(i.e. go slower in tall thick grass, on hills,
wet conditions, etc.)
NOTE: All specifications subject to change
without notice
.
DECKS
Model 5205M
6005M
7205M
Cutting Width
52”
60”
72”
Overall Width (w/chute)
61 ½”
69 1/2”
81 1/2”
Weight (deck), approx.
235 lbs.
236 lbs.
275 lbs.
Blades
(3) 18-3/8”
(3) 21”
(3) 25”
Cutting Height
1-1/2” to 5”
Material Thickness
10 ga.
Reinforcement Thickness
7 ga.
10 ga
Spindle Bearings
25 mm
SPECIFICATIONS
TRACTORS
Model 2505KOJ
2505KOT
2605KOT
Engine
25 H.P.
Kohler
Command
Pro
Hydrostatic Pumps
Wheel Motors
(2) HydroGear BDP-10A
Parker-Ross
Length
84”
Height (to seat back)
(to seat cushion)
47”
31”
Width
52”
Weight (tractor), approx.
760 lbs. 825 lbs.
Fuel Tank
11 gallons
Belt: Engine - Hydrostats
P/N D-3671
Tires, Rear
Front
24” x 12”-12 4 Ply
13 x 650 x 6 (Ribbed)
9 P-11527
NOTE: Tractor should be matched to deck to insure sufficient power is available for the intended
usage. ZETON BOSS (2707 series) uses the 6005M or the 7205M deck ONLY.
2505KAJ
2505KAT
25 H.P.
Kawasaki
2705KOJ 2707KOJ
2705K0T 2707KOT
27 H.P.
Kohler
Command
Pro
2605KOJ
26 H.P.
Kohler Command
Electronic
Fuel Injection