COTRE CO06D, Быстрый старт

Страница: 24 / 28

23
功能介绍
Features
and select “Radio Enable” for sending.
·
Enter “Menu” – “Contacts” – “Dial”, enter the other party’s device ID
for confirmation, and select “Radio Enable” for sending.
·
Press the “#” key on the standby interface to enter the dialing
interface, enter the other party’s device ID under the individual call
type for confirmation, and select “Radio Enable” for sending.
·
Configure “one touch call” through CPS to send “Radio Enable”.
2. After “Radio Enable” is sent successfully, it will prompt “Send
Successfully”, otherwise it will prompt “Send Failed”.
3. After receiving “Radio Enable”, the remotely inhibited device will
automatically restart and return to normal. After receiving “Radio
Enable”, the device that is not remotely inhibited will have no other
reaction except for automatic reply.
Voice Control Function
1. Preset the [Program] key to [VOX On/Off] key through programming
software.
2. Press the [VOX On/Off] key to turn on/off the voice control function.
VOX levels can be preset through programming software: Level 1,
Level 2, and Level 3, where Level 3 is the most sensitive. When the
radio VOX function is on, the preset VOX level is used.
TOT (Time out Timer) Function
In order to prevent some users from occupying the same channel for a
long time, users can set to enable the TOT function. When the user's
continuous transmission time on the current channel reaches the TOT
duration, the radio will stop transmitting and the speaker will give a
time-limit prompt tone. You can set the time out timer via programming
software. By default is 60 seconds. When OFF is selected, user can
transmit continuously.
功能介绍
Features