COTRE CO06D, Быстрый старт

Страница: 23 / 28

22
2. After “Radio Check” is sent successfully, it will prompt “Send OK”,
otherwise it will prompt “Send Fail”.
3. After “Radio Check” is received, there will be no interface alert, and
the device will automatically reply.
Radio Disable/ Kill (Private call only)
In case of loss of the device or other circumstances, in order to prevent
the other party from using the device, the device remotely deactivated
by execute “Radio Disable” command.
1. The methods of sending “Kill” are as follows:
·
Enter “Menu” – “Contacts” – “Contact List”, select the contact to
whom will be sent for confirmation, enter “Server”, and select “Radio
Disable” for sending.
·
Enter “Menu” – “Contacts” – “Dial”, enter the other party’s device ID
for confirmation, and select “Radio Disable” for sending.
·
Press the “#” key on the standby interface to enter the dialing
interface, enter the other party’s device ID under the individual call
type for confirmation, and select “Radio Disable” for sending.
·
Configure “one touch call” through CPS to send “Radio Disable”.
2. After “Radio Disable” is sent successfully, it will prompt “Send
Successfully”, otherwise it will prompt “Send Failed”.
3. The interface will display “Radio Disable” immediately after receiving
it. At the same time, no “Menu” and “Buttons” except ON / OFF
device. It can only be restored to normal through configure software
CPS or receiving the “Radio Enable” command.
Radio Enable /Activate (Private call only)
It is used to restore the device that was inhibited to normal.
1. The methods of sending “Activation” are as follows:
·
Enter “Menu” – “Contacts” – “Contact List”, select the contact to
whom “Radio Enable” will be sent for confirmation, enter “Server”,
功能介绍
Features
功能介绍
Features