COTRE CO06D, Быстрый старт

Страница: 21 / 28

20
4. New short message content can be created through the radio menu.
5. You can send a quick message to a private call contact.
6. You can send a quick message to the group call contact, and all the
radios in the group can receive the message.
7. After creating a new message, you can send it to a private call
contact, group call contact or manually key in contact and send to a
private call or group call contact.
Call Alert (Private call only)
Call alert can be used to get a hold of someone quickly for requesting
the recipient to call back. Call alert are repeated until response to. To
respond, the recipient can talk back.
1. The methods of sending “Call Alert” are as follows:
·
Enter “Menu” – “Contacts” – “Contact List”, select the contact to
whom a call alert will be sent for confirmation, enter “Server”, and
select “Call Alert” for sending.
·
Enter “Menu” – “Contacts” – “Dial”, enter the other party’s device ID
for confirmation, and select “Call Alert” for sending.
·
Press “#” on the standby interface to enter the dial-up interface,
enter the other party’s device ID under the private call type for
confirmation, and select “Call Alert” for sending.
·
Configure “One touch call” through CPS and send “Call Alert”.
2. After “Call Alert” is sent successfully, it will prompt “Send OK”,
otherwise it will prompt “Send Fail”.
3. After “Call Alert” is received, a display interface will pop up, showing
the sender’s ID or alias, and the alert tone will continue to sound.
Remote Monitor (Private call only)
Remote monitor is used to send a command to the other party, and the
other party’s device sends a voice to the command sender in a secret
state to achieve the purpose of monitoring the other party.
功能介绍
Features
功能介绍
Features