Cotic droplink Flare Gen2 Скачать руководство пользователя страница 3

Forks

 

 
Cotic 

drop

link

 bikes should always be used with suspension forks, as follows: 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

drop

link

 bikes are NOT approved for use with dual crown forks. 

 
 

Shock

 

 
The rear shock 

drop

link

 bikes are as follows: 

 
 
 
 
 
 
 
 
 
 
 
The above 

drop

link

 bikes use the following shock fittings (including UK made Jeht and FlareMAX frames):

 

 
Piggyback shocks may be used, usually with the piggyback reservoir installed at the down tube end, on the top of the 
main  barrel  of  the  shock,  with  the  exception  of  small  size  RocketMAX  which  must  be  fitted  with  the  reservoir   
underneath the shock at the seatstay end.  
 

WARNING:

 If installed with the reservoir underneath, it could hit the frame before full travel is achieved if you are not 

using a shock supplied by Cotic. If mounting the shock with the reservoir on the underside, let all the air out and fully 
compress the shock to check clearance to the down tube. If fitting a brand of shock not supplied by Cotic then always 
check clearance throughout the travel range to both top and down tubes and bottle cage if used, especially on size 
Small and Medium frames. Whilst we have endeavoured to check clearances for shocks, we can't check all products, 
or products which come to market after the designs are completed, therefore it is the responsibility of the owner of 
the bicycle to check safe clearances are maintained through the travel. 
 

 
 

      drop

link

 

Model                      Wheel                        Minimum Fork                Maximum Fork  

    (production date)                       Size                      Length/Travel (mm)        Length/Travel (mm) 

 

          Rocket Gen4                                                           539mm Static Length/         563mm Static Length/ 

         (March 2020)                      27.5” / 650B                       150mm Travel                      170mm Travel 

 

      RocketMAX Gen3                                                        561mm Static Length/         573mm Static Length/ 

         (March 2020)                             29”                              150mm Travel                      160mm Travel 

 

            Jeht Gen1                                                              541mm Static Length/         563mm Static Length/   

           (Oct 2020)                                29”                              140mm Travel                      150mm Travel 

 

           Flare Gen2                                                             531mm Static Length/         543mm Static Length/ 

           (April 2019)                        27.5” / 650B                       130mm Travel                      140mm Travel 
 

       FlareMAX Gen4                                                         526mm Static Length/         553mm Static Length/  

29”                               120mm Travel                     140mm Travel

            drop

link

 Model                 Shock eye-to-eye Length (mm)             Shock Stroke (mm) 

                Rocket Gen4                                            215                                                   63 

            RocketMAX Gen3                                        230                                             60 or 62.5 

                  Jeht Gen1                                              210

                                              210

                                                   55 

                 Flare Gen2                                              190                                               45 or 50 

             FlareMAX Gen4

                                                   50

           (April 2021)

Top Shock Mounting  

M8 x 15.75mm wide

Bottom Shock Mounting 

M8 x 24.0mm wide

Jeht Gen1 and FlareMAX Gen4 Taiwan Series Production use different shock fittings:

Top Shock Mounting 

M8 x 20.0mm wide

Bottom Shock Mounting 

M8 x 24.0mm wide

Содержание droplink Flare Gen2

















Отзывы: