Cotek CX1215, Руководство пользователя

Страница: 7 / 22

5
2-2 Specification
Model CX1215 CX1225 CX1235 CX1250 CX1280 CX2415 CX2425 CX2440
Output
Battery Type Lead Acid / Li-ion / Gel / AGM
Standard Boost Charge
Voltage
14.4V / 14.7V (Select by S1 DIP switch)
28.8V / 29.4V
(Select by S1 DIP switch )
Standard Float Charge
Voltage
13.8V / 13.5V (Select by S1 DIP switch)
27.6V / 27V
(Select by S1 DIP switch)
Main Rated Current 15A 25A 35A 50A 80A 12.5A 25A 40A
Main Output 1 2 2 3 3 2 3 3
ESB Output 1 1 1 -- -- -- -- --
ESB Output Voltage /
Current
13.8V/2A 13.8V/2A 13.8V/2A -- -- -- -- --
Battery Charging Mode 3-stage charging capability IUOU
Isolation Type Use active power MOSFET on each output terminal
Single Output Current Limit 15A 25A 35A 40A 40A 12.5A 25A 40A
Input
Voltage Range 90~264VAC
Frequency Range 47~63Hz
Power Factor (Typ.) PF > 0.92 at full load
Efficiency (Typ.) at 230Vac 87% 87% 87% 87% 87% 90% 90% 90%
Protection
Short Circuit Current is reduced to < 1A continued 30sec., will operate 30 seconds then turn off
Over Voltage
17.5V
±
1%, protection type: shut down output
(recovery after resetting AC power ON)
35V
±
1%, protection type: shut
down output
( recovery after resetting AC
power ON )
Over Temperature
Charger Over Temperature 100
±
5
°
C detected by heat sink
52
±
5
°
C (Optional temperature sensor)
Auto recovery after heat sink temperature goes down to 50
±
5
°
C
Function
Alarm Signal NC. / NO. Relay contact output (Please reference Alarms signal & Fan control)
Temperature Compensation
-10mv / 0.5 ° C with COTEK temperature sensor
Sleep Mode By Remote Controller and S1-4 DIP switch (Please refer to section 3-2)
Remote Controller Support COTEK Remote Controller CR-1 ( Please refer to section 3-6 and 3-7)
Environment
Working Temp. -20~50
°
C (refer to output load de-rating curve)
Working Humidity 20~90% RH non-condensing
Temp. Coefficient
±
0.03% (0~50
°
C)
Vibration 10~500Hz, 2G 10min. / 1cycle period for 60min. each along X, Y, Z axes.
Safety
&
EMC
Safety Standards Certified EN 60335-1, EN60335-2-29
Withstand Voltage I/P-O/P: 4242VDC, I/P-FG: 1768VDC, O/P-FG: 700VDC
Isolation Resistance I/P-O/P: 100M Ohms / 500VDC
EMI Conduction & Radiation EN 55022; EN 55024; EN 61204-3; EN 55014-1; EN 55014-2
Harmonic Current EN 61000-3-2; EN 61000-3-3; EN 61204-3; EN 61000-6-1; EN 61000-6-3
EMS Immunity IEC 61000-4-2, 3, 4, 5, 6, 8, 11; ENV 50204
Others
Dimension (WxHxD)
(Unit: mm)
183x72x243.4
183x72
x263.4
213x76.5
x272.4
213x76.5
x312.4
183x72
x243.4
213x76.5
x272.4
213x76.5
x312.4
Packing (Unit: kg) 1.6 1.7 1.9 3.1 4.0 1.6 2.9 3.9