2-5-5 AC Sharing :
Setting range = 10, 20, 30, 40, 50, 60, 70, 80, 90, 100
Default= 100 (Disable)
Setting Menu
SETT<value>
Description
AC Ratio
10
AC load 10%, DC load 90%
20
AC load 20%, DC load 80%
30
AC load 30%, DC load 70%
40
AC load 40%, DC load 60%
50
AC load 50%, DC load 50%
60
AC load 60%, DC load 40%
70
AC load 70%, DC load 30%
80
AC load 80%, DC load 20%
90
AC load 90%, DC load 10%
100
Disable
2-5-6 AC OVP Setting :
Set the Grid Over Voltage Protection (OVP) and transfer
to DC mode(or shuts down without battery).
Default = 130 VAC @ 1xx Model. 260 VAC @ 2xx Model
Model
Setting value range
1xx
127.5 VAC ~ 132.5 VAC
2xx
255 VAC ~ 260 VAC
2-5-7 AC OVP Recovery :
When the AC input voltage is higher than the OVP
setting, the SR series transfer to DC mode(or shuts down without battery); once the
input voltage falls below the set AC OVP recovery value, the SR series will
re-operate in AC mode. Default = 125 VAC @ 1xx Model. 150 VAC @ 2xx Model
Model
Setting value range
1xx
120 VAC ~ 127 VAC
2xx
240 VAC ~254 VAC
2-5-8 AC UVP Setting :
Set the Grid Under Voltage Protection (UVP) and transfer
to DC mode(or shuts down without battery).
Default= 90 VAC @ 1xx Model. 180VAC @ 2xx Model
Model
Setting value range
1xx
75 VAC ~ 90 VAC
2xx
150 VAC ~ 180 VAC
2-5-9 AC UVP Recovery :
When the AC input voltage is below the set UVP value, the
SR series transfer to DC mode(or shuts down without battery) ; once the input voltage rises
above the set UVP recovery value, the SR series will re-operate in AC mode.
Default= 95 VAC @ 1xx Model. 190VAC @ 2xx Model
Model
Setting value range
1xx
90.5 VAC ~ 100 VAC
2xx
181 VAC ~ 200 VAC
