Model
Setting value range
24V
26 VDC ~ 30 VDC
48V
52 VDC ~ 60 VDC
2-4-3 UVP Setting :
Setting Under Voltage Protection (UVP) and shutdown on
the inverter operation. Default= 18 VDC @ 24V Model. 36VDC @ 48V Model
Model
Setting value range
24V
18 VDC ~ 25 VDC
48V
36 VDC ~ 50 VDC
2-4-4 UVP Recovery :
When the DC input voltage is below the set UVP value,
the SR series shuts down; once the input voltage rises above the set UVP
value, the SR series will automatically restart.
Default= 25 VDC @ 24V Model. 50VDC @ 48V Model
Model
Setting value range
24V
23 VDC ~ 27 VDC
48V
46 VDC ~ 54 VDC
2-4-5 UV Alarm :
Setting Under Voltage (UV) alarm. When the input voltage is
lower than the set value, the SR series will sound a “beep” to remind you that the unit
is going to shutdown. Default= 21 VDC @ 24 V Model. 42 VDC @ 48 V Model
Model
Setting value range
24V
19 VDC ~ 26 VDC
48V
38 VDC ~ 52 VDC
2-5 AC Parameter
2-5-1 O/P Voltage :
Setting the SR series output voltage on the inverter
operation. 1xx = 100V, 110V, 115V or 120V ; 2xx = 200V, 220V, 230V or 240V.
Model
Setting value range
1XX
97 VAC ~ 127 VAC
2XX
194 VAC ~ 254 VAC
2-5-2 O/P Frequency :
Setting the SR series output frequency on the inverter
operation. 1xx = 100V, 110V, 115V or 120V ; 2xx = 200V, 220V, 230V or 240V.
Model
Setting value range
1XX & 2XX
50 or 60 Hz
2-5-3 Sync Frequency :
Setting SR series output frequency tolerance range on the
inverter operation. 1xx = 100V, 110V, 115V, 120V ; 2xx = 200V, 220V, 230V or 240V.
Model
Setting value range
1XX & 2XX
0 Hz ~ 3 Hz
2-5-4 AC or DC Mode :
Default =1, AC Mode is the 1st priority source.
DC Mode
：
DC is the 1st priority source, and the AC power is the 2nd priority source.
AC Mode
：
AC is the 1st priority source, and the DC power is the 2nd priority source.
Mode Priority
SETT<value>
DC Mode
0
AC Mode
1
