Cotech YT4755, Оригинальная инструкция

Страница: 2 / 84

2
EN
GL
IS
H
Electric Chainsaw, 1800 W
Art.no 18-3155 Model YT4755-UK
40-7936 YT4755
Read the entire instruction manual before using the product and keep it for future reference. We reserve the right
for any errors in text or images and any necessary changes made to technical data. If you have any questions
concerning technical problems please contact our Customer Services (see address on reverse.)
Warning! When you are using electric hand tools the included safety instructions should be followed
to avoid risk of fire, electric shock, and personal injury.
Always pull the plug out of the wall socket before servicing and adjusting the product.
1. Safety Requirements – Handheld power tools
General Safety Requirements – EN 60745-1
Warning!
Read all the instructions. Failure to adhere to the following instructions may lead to electric shocks,
fires and/or serious injury. The term “power tools” in the warning text below refers to your handheld mains
operated or battery operated tool.
SAVE THESE INSTRUCTIONS.
1) Work area
a) Keep the work area clean and well illuminated. Cluttered and poorly lit areas invite accidents.
b) Do not use power tools in explosive environments, e.g. near flammable liquids, gases or dust.
Power tools generate sparks that can easily ignite dust or fumes.
c) Keep children and other bystanders away from the area where you are using the power tool.
Distractions can cause you to lose your concentration and control.
2) Electrical safety
a) The power tool’s plug must fit correctly into the wall socket. Never modify the plug in any way. Never use
an adaptor together with earthed power tools. Unmodified plugs and suitable wall sockets decrease the risk
of electric shock.
b) Avoid physical contact with earthed objects, such as pipes, radiators, ovens or refrigerators.
There is an increased risk of receiving an electrical shock if your body is earthed.
c) Do not expose the power tool to rain or other wet conditions. If water gets inside a power tool it increases
the risk of electric shock.
d) Do not abuse the lead. Never use the lead to carry the tool or pull the plug from the wall socket.
Keep the lead away from heat, oil, sharp edges and movable parts. Damaged or tangled leads increase
the risk of electric shock.
e) When using power tools outdoors, use an extension lead that is suitable for this purpose.
Use of an extension lead designed for outdoor use decreases the risk for electric shock.
f) If for some reason you must use a power tool in a wet environment, always connect it to the mains via
an earth-fault circuit breaker such as an RCD (residual current device). Using an RCD significantly reduces
the chances of you receiving an electric shock.