10
EN
GL
IS
H
6
8
7
5
2
1
3
9
Setting cutter depth
• The router is equipped with a depth
stop (7) which is adjusted by turning
the locking screw (8).
When a rough setting has been made
fine adjustments can be made using
the adjustment screw (6).
• By turning the depth set block (9)
the depth of cut can be altered to
one of 7 fixed settings.
• The locking lever (3) is for raising
or lowering the height of the router
body. We recommend that the router
is locked when cutting as it is most
stable in that position.
Switching On/Off
Switching on:
Hold in the safety
catch (2) and
the power switch (1).
Switching off:
Release the power
switch.
Setting the speed
Select the speed by turning the speed
selector (5). After running the tool at low
speed for a long time, one should let
the motor run at maximum speed for
about 3 minutes to cool it down.
