7
EN
GL
IS
H
Use
Attaching sandpaper
1. Undo the spring clips.
2. Place a sheet of sandpaper over the sanding pad and line up the holes.
3. Fold the ends of the sandpaper over the ends of the sanding pad.
4. Secure the ends with the spring clips.
5. Make sure that the sandpaper is secure and not loose. If it is loose: Undo one
of the clips and pull the paper up until it is taut, then close the clip again.
Start and stop the sander using the trigger switch
1. Depress the trigger to start the sander and release the trigger to stop it.
2. To lock the trigger switch in, first depress the trigger and then push in the trigger lock
button. To release the trigger lock, press the trigger again and the sander will stop.
Sanding
1. Hold the sander firmly in both hands.
2. Move the sander back and forth, parallel with the grain of the wood.
3. Do not force the sander.
Note!
The sander needs to be on full power to ensure that the motor is cooled.
Attaching and emptying the dust bag
1. Slide the dust bag over the sleeve and twist it anticlockwise until it locks into place.
2. To remove the bag, twist it clockwise and pull it off.
3. Empty the bag regularly.
4. Always empty the dust bag when you have finished work.
