PRODUCT ASSEMBLY
PRODUCT ASSEMBLY
This switch can control the steering of the flexible shaft: press the L for
forward rotation and press the R for reverse rotation.
Notice: inversion is
used to retract the spring (Fig. 3).
2. When the operating handle is free of force, the flexible shaft will stop
stretching regardless of the forward or reverse rotation(Fig. 6).
3.Hold the handle, press the lock button to the left, turn on the switch, and
turn forward to control the expansion of the soft shaft(Fig. 7)
Pipe dredge (before operation, be familiar with the automatic scaling operation of the
flexible shaft, otherwise it will lead to personal injury or damage to the tool)
1. Please place the tool head at a distance of less than 150mm away from the pipe
opening. If the distance is too long, it will cause the flexible shaft to be twisted and knotted;
and do not place the tool head too close to the pipe, which is inconvenient to observe the
condition of the flexible shaft (Fig. 8).
Flexible shaft auto scaling
1
.
Pressing the speed switch forward, pull the handle up and forward the
flexible shaft (Fig. 4);
2) The switch is reversed, pull up and the soft shaft retracts (Fig. 5).
Figure 3
Figure 4
Figure 6
Figure 7
Figure 8
Figure 5
