Swing Assembling
1. Swings arrives in 4 pieces,
and 2 hanging ropes, a jump
body for assembly.
2. Put the jump body on the
floor, and put the 4 velcros to
the black mat direction
3. Put the 4 metal tubes with
foam into the sleeves one by
one.
13. After the bolt assembling,
and cover the velcro belt, and
repeat 3 times on other 3
bolts.
14. Top appearance as the pic
shows.
15. Assembly is finished,
and ready for swing.
4. Put the tube like this.
5. Put 2nd tube to the sleeve,
small socket to the big socket
of the 1st tube, and connect it.
6. Repeat it, and make it like
half folded as the pic.
7. Then connect the body as a
round platform.
8. Assemble the screw bolt,
first put it through the velcro
belt.
9. Screw bolt goes through
the velcro belt cover.
10. Assemble the screw bolt to
the tube of the frame.
11. Tighten it with the screw
nut,do not forget the washer.
12. Use the wrench to tighten
it before use.
1
2
3
4
Tent Assembling
1.Lay the cover on swing surface. The four openings are facing to four hanging ropes.
2.Lock the buckle on the bottom of the opening. Repeat this 3 times one by one.
3.Pull the rope and pass through the ring on top of the swing. Then go through the black plastic
buckle on the rope like pictures shows. And repeat it for the other rope.
4.The length of the rope is adjustable. Adjust it to a suitable height. The assembly is finished.
5
4
