Costar DirectIP DC-B Series, Инструкция по эксплуатации

Страница: 8 / 20

Part 1 – Introduction
8
Overview
Product color and design may vary depending on the
model.
Front
1
2
3
4
1
Built-in Microphone
2
Image Sensor
3
CS - Mount Ring Screw
4
CS - Mount Ring
•
Built-in Microphone
Receives audio.
• Image Sensor
Converts optical data into electronic signals.
If the lens is not attached to the camera, use the
protective cover to cover up the image sensor.
•
CS-Mount Ring Screw
Used to secure the mount ring after adjusting the
Back Focus.
• CS-Mount Ring
Used to tighten the CS mount lens and adjust the
Back Focus.
Side
1
2
1
Protective Cover
2
Auto Iris Lens Connector
• Protective Cover
If the lens is not attached to the camera, use the
protective cover to protect the image sensor.
•
Auto Iris Lens Connector
If using a DC type or P type auto iris lens, connect the
auto iris jack.
Top, Bottom
1
1
1
1
Mount Hole (1/4-20 UNC)
• Mount Hole
This bracket can be installed on either top or bottom
of the camera. Use 1/4–20 UNC (20-thread), 2.5mm
+/- 0.2mm (ISO standard) or 0.197 (ASA standard)
screws to attach the mount.