Cosmos XP-704 III, Инструкция по эксплуатации

Страница: 6 / 28

- 5 -
No. Name Functions
1 AT-2G Gas Probe Gas inlet.
2 DF-114 Drain Filter
Protects the Gas Leak Detector from water, dust,
and other foreign matter.
3 FE-106 Dust Filter
Protects the Gas Leak Detector from fine dust,
sand, and other foreign matter.
4 Outlet Gas outlet to exhaust sampled gas.
5 POWER/ SENSITIVITY Button
Turns the power ON and OFF.
Sets the detection sensitivity level.
6 BUZZER Button
Turns the alarm buzzer and operation sound ON
and OFF.
Switches the gas types for two-gas model.
7
ZERO/ RESTART PUMP/
BACKLIGHT Button
Restarts pump operation after a pump error. Also
lights the LCD backlight and displays the target gas
name on the LCD.
8 Alarm/ Error Lamps (red)
Light up or flash when detecting gas leakage. The
flashing frequency increases as the concentration
of the gas leak increases. The lamps light if the
concentration is very high. These lamps also flash
when an error occurs in the pump or sensor.
9 Buzzer hole The buzzer sounds.
10
LCD Displays the gas sensitivity and messages.
(a) The remaining battery charge is displayed.
Battery charge:
High . . . . . . . . . . . . . . . . . Low
(b) It indicates a possible status of zero adjustment.
(c) It shows the operation sound. (The indicator is
displayed only when the operation sound is
turned ON.)
(d) It shows the alarm sound. (The icon is displayed
only when the alarm sound is ON.)
(e) The pump operation is displayed. (The indicator
rotates if the pump is operating normally.)
(f) The detection sensitivity level, target gas name,
and errors are displayed.
11 Gas Sensitivity Lamps (green)
Indicate the detection sensitivity level. There are
five detection sensitivity levels.
12 Battery Lid The cover to the battery compartment.
(a)
(b)
(c)
(d)
(f)
(e)
- 4 -
2. Part Names and Functions
8
1
2
11
7
9
5
4
10
6
3
12