Cosmos XP-704 III, Инструкция по эксплуатации

Страница: 17 / 28

- 15 -
Dust Filter Replacement
FE-106 Dust Filter prevents to enter dust particles and sand into the pump inside the
Gas Leak Detector. Do not remove the Dust Filter.
The Dust Filter will be kept clean in normal use (with DF-114 Drain Filter). However,
the Dust Filter is available for replacement as needed (sold separately).
1) Turn the cap of the Drain Filter counterclockwise
to remove together with the Gas Probe.
2) Remove FE-106 Dust Filter and replace with a
new filter.
3) Attach the Drain Filter and reassemble.
 Make sure to attach FE-2 Filter Element in the Drain Filter when using
FE-106 Dust Filter.
 It cannot prevent water from entering into the Gas Leak Detector
unless using FE-2 Filter Element.
 Do not replace FE-106 Dust Filter while the Gas Leak Detector is
operating.
CAUTION
Gas Probe
Cap
Drain Filter
Remove
Insert
FE-106 Dust Filter
- 14 -
s
5. Replacement of Consumable Parts
Filter Element Replacement
When the Filter Element is dirty or wet, or when the water or liquid is inside the Drain
Filter, clean out the Drain Filter and replace the Filter Element.
1) Turn the filter case counterclockwise and
remove it.
2) Remove the O-ring from inside the cap.
3) Replace the Filter Element with a new filter.
4) Attach the O-ring, put the filter case back
together and reassemble.
 Do not replace the Filter Element while the Gas Leak Detector is
operating. Dust or other foreign matter may enter the Gas Leak
Detector.
 Mount the Filter Element correctly. If the Filter is not in place properly, it
will not function properly and will not be able to detect correctly.
 Attach the filter case securely. If the filter case is loose, water or other
foreign matter may leak into the Gas Leak Detector.
 If water or liquid reaches inside the Gas Leak Detector through the Filter
Element, it is in need of repair. It will not be able to detect correctly.
CAUTION
Do not push or poke the Filter Element. It may damage the waterproof structure.
NOTE
O-ring
FE-2
Filter Element
Filter Case
Cap
Drain Filter
If water, dust, or other foreign
matter is in the Drain Filter, be
careful not to enter into the Gas
Leak Detector.
CAUTION
Clean the inside of the cap and filter
case with a dry cloth as needed.
R
emove water or liquid completely and
dry the parts before replacing with a
new Filter Element.
NOTE
Make sure to attach FE-2 Filter
Element between the cap and the
filter case.
CAUTION