25
•
A water line is required in order for the water dispenser and icemaker to
operate properly.
•
To prevent burns and product damage, only connect the refrigerator
water line to a cold water supply.
•
Turn the icemaker OFF if the refrigerator will be used before the water
line is connected.
•
Do not install the icemaker tubing in areas where the ambient
temperatures fall below freezing.
•
Wear eye protection during installation to prevent injury.
•
Before making the connection to the refrigerator, be sure the refrigerator
power cord is not plugged into the wall outlet.
•
Before connecting the water line to the house, purge the house line for at
least 2 minutes.
WATER PRESSURE
•
Models with water filter:
30 - 100 psi (207 - 700 kPa)
•
Where reverse osmosis water filtration system is connected to a
cold water supply:
40 - 60 psi (276 - 414 kPa)
NOTE:
If the water pressure to the reverse osmosis system is less than 40 - 60 psi
(276 - 414 kPa):
•
Check to see whether the sediment filter in the reverse osmosis system
is blocked. Replace the filter if necessary.
•
Allow the storage tank on the reverse osmosis system to refill after
heavy usage.
•
If the water pressure remains low, call a licensed, qualified plumber.
•
All installations must be in accordance with local plumbing code
requirements.
