16
17
OPERATING INSTRUCTIONS
Low
Speed
Medium
Speed
High
Speed
Motor Off
Switch
Press this button to turn on the lights, and press
again to turn them off.
Press this button to run the motor at low speed.
Press this button to run the motor at medium speed.
Press this button to run the motor at high speed.
Press this button to stop the motor while it is running
on any given speed.
Light
Low
Speed
Medium
Speed
High
Speed
Motor Off
Switch
1
2
1
2
3
3
Light
MAINTENANCE
CAUTION:
NEVER PUT YOUR HAND INSIDE OF THE UNIT WHILE
IT IS OPERATING. FOR THE BEST PERFORMANCE CLEAN YOUR
RANGE HOOD REGULARLY.
CLEANING
1. Use only mild soap or cleaning solutions to clean the hood’s outer surface.
Dry surfaces using a soft cloth.
2. Stainless Steel cleaner may be used on the external surface.
3. Clean the Range Hood
motor
assembly
every
1 to 3 months depending on use.
4. DO NOT
clean the motor or electrical components with water or any
other liquid.
REPLACING LIGHT BULBS
CAUTION:
LAMP UNIT MAY BE HOT! WAIT UNTIL THE UNIT IS COOL.
BEFORE ATTEMPTING TO REPLACE THE LED LAMPS. MAKE SURE
THE UNIT IS POWERED
OFF
AND
DISCONNECTED
.
1. Remove the aluminum filters
2. Disconnect the wire for the LED light being replaced.
3. Reach your hand into the unit and push the LED light housing out of
the hole to remove it. Replace the LED light and connect the wire.
4. Reinstall the aluminum filters
