9
MACHINE PREPARATION
RECHARGING THE BATTERIES
Check the battery charger is suitable for the batteries installed, in terms of both capacity and type
(lead/acid or GEL and equivalents).
ATTENTION:
Never recharge GEL batteries with an unsuitable battery charger. Follow
the instructions given by the battery/battery charger manufacturer with the utmost
attention.
In order not to cause permanent damage to the batteries, it is essential to avoid their
complete discharge: arrange the recharge within a few minutes of the switching on of
the "discharged batteries" blinking light.
NOTES
: Never leave the batteries completely flat, even if the machine is not being
used.
WARNING!
For the daily recharging of the batteries, you must fully respect the
indications provided by the manufacturer or retailer. all installation and maintenance
operations must be carried out by specialized personnel. Danger of gas exhalation
and leakage of corrosive liquids. Danger of fire: Keep naked flames at a safe
distance.
BATTERY INDICATOR
The battery indicator is digital, with 4 fixed positions and a flashing one. The numbers that appear on
the display show the approximate charge level.
4
= maximum charge,
3
= 3/4 charge,
2
= 2/4 charge,
1
= 1/4 charge,
0
= discharged batteries (flashing)
WARNING!
A few seconds after the appearance of the flashing “0”, the brush motor
switches off automatically. With the remaining charge it is possible to complete the
drying process before starting the recharge.
ASSEMBLING THE SQUEEGEE
For packaging reasons, the squeegee is supplied disassembled from the machine, and must be
assembled as shown in the figure, inserting the clip into the small column of the squeegee.
Insert the squeegee tube in the special sleeve.
