WORK
PREPARING TO WORK
Connect the connector (1) to the batteries
1
Turn the key of the main switch (only on BT machines) to positio
n “1” (clockwise).
Press the brush switch (2)
press the suction switch (3)
3
2
By means of the tap lever (4), regulate the quantity of detergent solution - it must be sufficient to
wet the floor evenly, but not so much that it leaks from the splash guard. Remember, however,
that the correct quantity of solution always depends on the type of floor, the degree of dirtiness
and the speed used.
Release the pedal to lower the base
Lower the squeegee by means of the lever (5)
5
4
Via the "man present" lever (6), the brushes begin to rotate and the squeegee begins to suck in.
During the first metres, check there is sufficient solution and that the squeegee dries perfectly.
6
