INSTALLATION INSTRUCTIONS
Selecting installation location
Select an installation location which is rigid and strong enough to support or hold the unit, and select a
location for easy maintenance. Read completely, then follow step by step.
Indoor unit
Do not expose the indoor unit to heat or steam.
Select a place where there are no obstacles in front of
or around the unit.
Make sure that condensation drainage tube can be
conveniently routed away.
Do not install near a doorway.
Ensure the spaces indicated by arrows from the
wall, ceiling or other obstacles.
A place where noise prevention is taken into consideration.
Min. 3 ft. from TV or electronic instrument.
There should not be any direct sunlight on the indoor unit,
sunlight may fade the color of the unit.
More than 15cm
(to the ceiling)
More than
More than
12cm
12cm
More than 2.0m
(from the floor)
Fig.1
Outdoor unit
If an awning is built over the outdoor unit it must be done in a
way that does not block air flow to the unit.
Keep the spaces indicated by arrows from wall or
other obstacles.
Do not place animals and plants in the path of the
air inlet or outlet.
Take the air conditioner weight into account and
select a place where noise, vibration, and hot air
discharged will not be an issue.
Do not install in a location exposed to flammable gas.
Do not install high frequency machines such as a
welding machine near the air conditioner.
Rooftop installation:
More than 30cm
More than 30cm
More than 60cm
Front
More than 200cm
Fig.2
If the outdoor unit is installed on a roof structure, be sure to level the unit.
Ensure the roof structure and anchoring method are adequate for the unit location.
Consult local codes regarding rooftop mounting.
Recommended Tools For Installation:
Level gauge
Screwdriver
Electric Drill
Hole Saw Bit
Flaring Tool
Torque Wrench
Adjustable Wrench
Tape Measure
Hex Wrench 4mm
Leak Detector
Vacuum pump
Gauge manifold
Users manual
Thermometer
Multi-meter
Pipe Cutter
3