Cosen V2026NC, Инструкция по эксплуатации

Страница: 46 / 142

4 ‐ 12
No Item Function Description
20
Saw bow front limit
switch indicator
When saw bow cuts or moves forward and touches
the front limit switch, the RED light will come on
which means the cut is finished or saw bow already
reaches the end.
All limit switches have been set up by the
manufacturer before shipment. Make random
changes will affect cutting precision.
21
Guide arm safety
position indicator
Indicates if the guide(saw) arm is within its safety
range for the saw bow to move forward. This safety
design prevents the saw arm from being improperly
positioned and hitting the workbed while blade
moves forward.

Light on: Saw bow has reached the minimum
height and is not allowed to descend any
further. Raise the saw bow again, check on the
saw arm position and move it to a safer place.

Light off: Saw arm is at a proper height and
within the safe range.
22
Angle setting Key ‐ in ###.# in HMI, press “Swivel” and saw bow
inclines to the setting angle.
Saw bow must be at rear limit switch position
to swivel. Do not swivel saw bow if installing 90° vise
plates. Otherwise saw blade will cut the vise plates.
When adjusting the angle of saw bow
manually, actual angle and angle displayed on the
screen need to match for the machine to start
cutting.
23
Blade speed display Displays current blade speed.
24
Miter angle display Displays the current angle the saw bow is swiveled
at.
25
(yellow highlight)
Error display
Displays error messages in the order of occurrences;
press the message to clear the messages.
Error messages must be cleared for the
machine to continue to operate normally.