9
10
Buckle Placement for Smaller Infants
4.
Replace Pad and
Check Buckle
Pull up on buckle to make sure it
is secured.
The buckle
MUST
not pull out.
2.
From Bottom of Seat,
Pull Metal Retainer
Towards You and Push
It Up into 2nd Slot As
Shown
3.
From Top of Seat,
Lift Pad Up and Lay
the Metal Retainer Flat
Against the Shell As
Shown
1.
With Buckle in the
1st Slot As Shown,
Turn the Seat Over
If you need to move the buckle to
the 1st slot, see pages 6-7.
WARNINGS:
Make sure that the harness height is
correct for your child’s size.
Do not use this child restraint unless the top
of your child’s head is at least 1 in. (2.5 cm)
below the top of the child restraint.
Failure to follow these steps can result in seri-
ous injury or death.
4.
Rethread Harness
Straps Into Brackets
From the back of child restraint,
thread one harness end onto one
adjustment bracket by threading
loose end over lower bar, behind
the locking teeth and up between
upper teeth and top of bracket.
Thread harness end down be-
tween locking teeth and out the
bottom of bracket as shown.
Make sure harness does not twist.
Repeat for other adjustment
bracket.
