41
42
6.
Check Belt Tightness
Hold base at the belt path with
your weakest hand.
Push and pull from side to side.
It should not move more than
1 in. (2.5 cm).
7.
Secure Child in Child
Restraint
See pages 11-15.
8.
Attach Child Restraint
to Base
To attach to base, see page 16.
Pull up on front two corners of
child restraint by infant’s feet to
make sure it is locked to the base.
Carry handle
MUST
be upright
AND locked when installed in
the vehicle.
If it moves more than 1 in. (2.5 cm),
you can try:
A.
Pulling the belt tighter.
B.
Reinstalling the base.
C.
Changing to a different seating location.
D.
Switching to vehicle belt installation.
To Release Lower Anchor
Belt
Remove shell from base.
Remove tension from the lower anchor
belt by pushing down on side of base
with the lower anchor belt adjuster.
Then press the adjuster button to
loosen belt.
Unhook from anchor by squeezing
spring lever on hook, pushing hook
back into the seat bight, and twisting.
Then pull it out of the vehicle seat.
Store lower anchor belt when not
in use. See page 32.
9.
Check Level Line
Repeat steps 3-8 if level line is
not parallel with the ground.
Adjust the base if needed.
See
page 17 on how to use the
base adjustment
.
NOTE:
You may need to place a
large rolled towel(s) or foam pool
noodle(s) under front of base to
help make level line parallel with
the ground.
Check often to be sure padding is
still in place and the belt is tight.
