Cosco CEB TRIM-500E, Руководство пользователя

Страница: 4 / 15

3
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
Warning: It will be harmful if you disobey the above-mentioned precautions.
Computer Operation
This equipment is used for aerobic exercise, and the capacity of the exercise should be increased step by
step.
1). To control the exercise capacity by adjusting the tension control.
2). When you find some internal parts of the bike are abrasive and loose after using for a long time, please
open the covers under the guiding of the machinist and adjust the resistance of the belt. The belt should
not be too loose or too tight, which should be subject to running smoothly and not skidding.
SPECIFICATIONS:
This computer’s model is E-239B, with 4-bit micro processor and
single window LCD (see the left picture) and it has hand pulse sensor.
KEY FUNTION:
A) AUTO ON/OFF : The monitor will be auto-powered when starts exercise or
press the key. The monitor will be automatically shut off if there is no
signal coming in for 4 minutes,
B) SCAN : It displays the values:
①
time
②
speed
③
distance
④
calories
⑤
pulse
⑥
total distance.
The values change every 4 mins.
C) TIME (TMR): Auto-memorize the workout time while exercising (min:sec).
D) SPEED (SPD): Display the current speed (km/h).
E) DISTANCE (DST): Accumulate the distances while exercising (km).
F) CALORIES (CAL): Auto-memorize calories amount consumed while exercising (Kcal).
G) TOTAL DISTANCE (ODO) : Display the total distances while exercising. When the signal inputs, it start
the value up on the original data. The ODO can’t be reset (by RESET key) except you replace battery
once.
H) PULSE (PUL): Display the user’s heart rate per minute while exercising. Remark: You have to hold on
reaction planks with both hands for 4-5 seconds, and then it can display your pulse. The shinning heart
means signal inputs.
I) RESET/CLEAR : To let the value reset.
J) BATTERY: If there is a possibility to see an improper display on the monitor, please replace the
batteries to have a good result .This monitor uses two ”AA’ or ”UM-3” batteries.