- 13 -
The Operation
Power The required main power is 220 - 240 VAC
.
Connect the power, all the windows will bright for two seconds
，
then enter the waiting mode.
The speed is zero and the incline is zero.
WAITING MODE
Change the PROGRAM1-PROGRAM28
，
HRC65 and HRC85 at a fixed time. Press any key to
enter the program choosing mode.
CHOOSING PROGRAM MODE
Change the PROGRAM1-PROGRAM28
，
HRC65 and HRC85 at a fixed time. Press any key to
enter the program choosing mode
Press MODE key to check the total distance, total calories and the total time in this program.
Press START key to start the treadmill after choosing the program or press ENTER key to enter
the setting time.
Press INCLINE2 and SPEED5 in the time to clean the total distance, total calories and the total
time.
MANUAL MODE
The treadmill will run by pressing START key. The initial speed is 1.0km/h and the incline is 0%.
You can set the target time which is 20 minutes when the time window is flashing. You can change
the target time by press “SPEED+/SPEED-”key. The max value is 99 minutes and the minimum
value is 5 minutes.
Press MODE key to change the target distance. The initial distance is 5.0 km/h. You can change
the target distance by press “SPEED+/SPEED-”key. The max value is 99.0km/h and the minimum
value is 1.0km/h.
Press MODE key again to set the target calories. The initial calorie is 100calories. You can change
the target calories by press “SPEED+/SPEED-”key , the value of calories will increase or decrease
5 when you press one time. The max value is 1000 calories and the minimum value is 5 calories.
PROGRAM
After choosing the program mode, press “ENTER” key to enter. Press “SPEED+/SPEED-”key to
set the time. The max time is 99 minutes and the minimum time is 5 minutes.
There are 23 fixed movement modes. The treadmill will run according the setting value. Press
“SPEED+/SPEED-” key to change the setting value.
USER
The programs 24-28 are user mode.
After choosing the program, press ENTER key to enter, after this, please choose the time. The
default time is 20 munities.
Press MODE key to enter the segment setting. There are 30segments.
Press “SPEED+/SPEED-” key to set the speed and press “/INCLINE-”key to set the
incline value in every segment.
Press START key to run and record the result in the setting state. Press STOP key to adjust the
result and it will display the setting mode.
Содержание SX-3366
Страница 1: ...TREADMILL MANUAL SX 3366...
Страница 5: ...5 EXPLORE DRAWING...
