- 12 -
countdown of calories or P1-P2…..-P8.
¾
SPEED+: Press this key to increase speed or time or distance or calorie value.
¾
SPEED-: Press this key to decrease speed or time or distance or calorie value.
¾
ENTER: Press this key to confirm the choosing item.
¾
: Press this key to increase incline value.
¾
INCLINE-: Press this key to decrease incline value.
¾
Press PLAY key to play or pause the music.
¾
Press TRACK-/VOLUME- or TRACK+/ to choose the music.
¾
Press TRACK-/VOLUME- or TRACK+/ for a long time to adjust the volume.
Manual Mode
¾
Waiting
mode
¾
The treadmill will run by pressing START key.
¾
Window
display:
¾
Time window: display the time value
¾
Cal window: display the calories value
¾
Distance window: display the distance value
¾
SPEED
window: display the speed value.
¾
INCLINE/PULSE window: display the incline value or display the pulse value (when there is not
heartbeat, it will display HP). When there is inclining, it will display incline value for 5 seconds.
RUNNING MODE
¾
Press SPEED+/SPEED- key to set the speed of 1.0-12.0 km/h.
¾
Press /INCLINE- key to set the incline of 0%-15%
。
¾
Presses START key to enter the running mode after the countdown of 3 seconds.
¾
Press STOP key to stop the treadmill
¾
COUNTDOWN
MODE
WAITING MODE
¾
Press MODE key to change the NORMAL MODE-TIME MODE-DISTANCE MODE-CALOREIS
MODE-P1……P8-NORMAL MODE in turns. The setting mode will flash
TIME MODE
¾
The default time is 30 minutes.
¾
Press SPEED+/SPEED- key to adjust the target time of 10:00-99:00.
¾
Presses START key to enter the running mode after the 3 seconds.
DISTANCE MODE
¾
The default distance value of 5.0km.
¾
Press SPEED+/SPEED- key to adjust the target distance of 1.0km-999.0km..
¾
Presses START key to enter the running mode after the 3 seconds.
CALOREIS MODE
¾
The default calories value is 100calories.
¾
Press SPEED+/SPEED- key to adjust the target calories value of 100 calories-9900 calories.
¾
Presses START key to enter the running mode after the 3 seconds.
Содержание SX-3030
Страница 1: ...TREADMILL MANUAL SX 3030...