Cosatto Scootle Nitty Gritty, Руководство пользователя

Страница: 5 / 25

create more space for an older child.
You can use the harness with your child as long as the shoulder harness fit your child’s
shoulder correctly.
To loosen the harness, push the adjuster button (f) in as you pull the shoulder harness
forward as much as possible (g).
Important: Pull the harness UNDER the chest pads. DO NOT pull on the chest pads.
To tighten the harness pull the adjustment strap forward (h).
4 - adjusting the seat 2
There are 2 positions for the backrest. Push the adjustment levers on either side inwards
(a) and push the backrest back (b) to recline the backrest. Pull the levers outwards (c) and
push the backrest forwards (d) to put the backrest in the upright position.
Note: Ensure the adjustment levers are both locked in the same position before use.
To adjust the angle of the seat base, pull down and forward the support on the underside
of the seat (e) until the support fits to the front of the seat (f).
Note:
Only use the seat base support for Group 1. Do not use for Group 2 or 3 applications.
5 - installation of the car seat 9 to 18kg (group 1 - approx.
9 months to 4 years old) - part 1
Place the child car seat in the forward facing position on the vehicle seat.
Pull the vehicle seat belt and thread the diagonal belt through the slot in the side of the
backrest (a) and the lap belt under the seat belt guide (b). At the rear of the headrest fit the
vehicle seat belt to the belt guide (c).
Thread the vehicle seat belt behind the child car seat harness and towards the vehicle seat
belt buckle. The diagonal belt fits above the armrest (e). The lap belt fits through the belt
guide under the armrest (f).
Fasten the vehicle seat belt (g).
6 - installation of the car seat 9 to 18kg (group 1 - approx.
9 months to 4 years old) - part 2
Locate the flap tag on the seat marked with an arrow.
Lift the flap on the seat (a) and fit the vehicle lap belt under the belt guide (b). Push the flap
back down to cover the vehicle lap belt.
Carefully kneel on the child car seat to push it into the vehicle seat. Pull the vehicle seat belt
at (b) to tighten the lap section of the belt then pull the diagonal section tight at (c & d).
The child car seat should now be secure.
IMPORTANT:
The position of the vehicle seat belt buckle can affect the stability of the child
car seat. In an accident this could stop the child car seat from protecting your child as well
as it should. If, when the vehicle seat belt is properly tightened, the buckle lies in the position
marked then try fitting the child car seat in another seating position in your vehicle.