Cosa Alarko, Инструкция по установке и эксплуатации

Страница: 94 / 108

I can not save
There may be two reasons:
1. You may not really be able to save.
You can check the following:
a.
Setting your heater’s flow temperature at
50°C in condensing boilers, and 50°C - 60°
C in conventional boilers would help your
house to warm up faster and help your
heater to run in shorter intervals.
b. By using Alarko By Cosa's Auto Control
or Weekly Schedule feature, you can
make automatic switches between
Home, Sleep and Away modes according
to your preferences.
c. Changing the target temperature of
Sleep and Away modes to a lower
temperature than Home mode will increase
the savings rate.
d. Even decreasing the target
temperature by 1
℃
can make significant
differences.
e. You can change the Stop and Run
intervals in “Heater Settings” under
“Heating Cooling Settings” in your
application. You can try changing this
setting according to the structure of your
home and your comfort preferences. For
example, if you select 22
℃
degrees as the
target temperature and the stop interval as
0.1, Alarko By Cosa will stop your heating
systeö when your home reaches 22.1
℃
Frequently asked questions
94