WARNING:
THE 220V POWER CABLE MUST BE REMOVED WHEN INSTALLING THE CONNECTION CABLES REQUIRED
FOR HEATER CONTROL.
HEATER INSTALLATION
Once the cable is installed to the
heater, connect the other end to
terminals 1 and 2 located on Alarko
by Cosa’s orange cover and place the
device back onto the cover.
To test the connection between the
Alarko by Cosa Heater Unit and the
heater, press the button on top of the
Wireless Heater Control Unit and hold
down for 2 seconds to turn the heater
on or off. Observe whether the heater
turns on or off to ensure that the device
is properly connected.
To pair Alarko by Cosa devices, you
must first set them to pairing mode.
To set your Wireless Heater Control Unit
to pairing mode, press the right button
behind the orange back cover and make
sure that the led behind the pair icon is
slowly blinking. To set your Alarko by
Cosa Smart Thermostat to pairing mode,
you must first access the Settings menu
on the device and use the top button to
select the pair icon. Once pairing is
successful, the Led behind the pair icon
on the Wireless Heater Control Unit
light will remain fixed.
PAIRING
HEATER CONNECTION
TEST
Содержание Alarko
Страница 5: ......
