CORVUS TERRAIN T21 Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 84

CORVUS TERRAIN T21 Скачать руководство пользователя страница 70

We reserve the right to modify the product and the design.

70

USER

MANUAL

PRODUCT LIABILITY

SUPPLEMENT SUBJECT TO PRODUCT LIABILITY DIRECTIVE 1999/34/CE OF 10/05/1999

1. The User Manual has been delivered to the customer or to his or her legal representative when they have taken delivery of the product. A contact person

has been appointed to respond to queries.

2. The product has been presented to the client (legal representative) before it was handed over. The client (legal representative) has been informed that

the product should be used only in accordance with the conditions laid down by the manufacturer (as described in the User Manual). The client (legal

representative) fully understands the instructions.

3. The client (legal representative) has been informed that the manufacturer shall not be liable for problems resulting from any modification of the vehicle.

4. The client (legal representative) declares by their signature that they have been informed and that they understand the points set out above.

Date and signature of the client (legal representative).

«
...
68
69
70
71
72
...
»

Содержание TERRAIN T21





















































































Отзывы:

Нет отзывов