CORVUS TERRAIN T21, Руководство пользователя

Страница: 48 / 84

We reserve the right to modify the product and the design. 48
USER
MANUAL
underbody protector WHEELS
Disassembly:
1. Remove the 12 screws (1) from the front underbody protector.
2. Uncouple the protector.
3. Remove the 8 screws (2) from the rear underbody protector.
4. Uncouple the protector.
Do not drive without the underbody protector, as this could jeopardise
the integrity of important components such as the transmission.
The underbody protector must be kept clean, both internally and
externally. In order to be able to detect fluid leaks from the vehicle,
to avoid rust due to trapped water, etc.
Disassembly:
1. Put the vehicle in a horizontal position.
2. Engage the parking brake.
3. Raise the area of the vehicle (front or rear) where the wheel you are
removing is located (see page 47).
4. Remove the four screws (3) holding the wheel rim.
5. Remove the wheel.
Perform the above procedure in reverse for the installation .
NEVER drive without one of the wheel bolts, as this poses a great
risk to your safety.
TECHNICAL INFORMATION. Wheel nut tightening torque: 70 Nm.
1
2
1
2
3